AW Direct - 1-800-243-3194

Half Fenders and Quarter Fenders

Protect the underside of your truck from dirt and debris. These stainless steel fenders mount over single or dual wheel rear tires to keep sand, salt, mud and road debris from flying forward and making ... MORE INFO

Buyer Products Paddle Latches

Keep doors securely closed. This small single point, flush mount latch measures 4 3/4” x 3 5/8”. Mounts in 2 3/4” x 3 3/4” recess. Made in USA.... MORE INFO

Folding Step - 6-1/2"W x 5"L x 5"H

Serrated surface prevents slipping. Made from malleable iron with a zinc finish, this step doubles as a hand hold, and folds out of the way when not in use. Holds up to 500 lbs. Mounting hardware not included. Made in USA.... MORE INFO

Rubber Fender Guards

Protect against damage from road splash and debris. These fender guards are not only functional, they also enhance the appearance of any vehicle. Fender guards help to eliminate damage caused by splash, ... MORE INFO

Jumbo Folding Step - 6-3/4"W x 6-3/4"L x 5"H

Holds up to 2,000 pounds. This die cast zinc aluminum alloy step has a rugged chrome finish and a serrated texture for extra traction. Meets NFPA requirements. Includes rubber gasket. Mounting hardware ... MORE INFO

Recessed Step - 7-3/8"W x 6-1/4"H x 4"D

Dual purpose item! Made from rust-free aluminum, this step features a shiny, polished face and a diamond plate tread for safety. 7 3/8"W x 6 1/4"H x 4"D. Requires a 5 9/16"W x 4 1/2"H hole to mount. ... MORE INFO

Flush T-Latches

T-latches hold doors closed tight. Flush mounted "t" latches are made for right hand mounting applications. Single point latches are supplied with two keys and feature a .66" adjustment of cam. Measure ... MORE INFO

Fender Flares

Add a finishing touch to your truck. Custom designed for a perfect fit, these fiberglass fender flares install in minutes. Paint to match your truck for a truly custom look. Sold in pairs. Made in USA.... MORE INFO

Hand Rail Kits

Get great looks and added safety. Add these Hand Rails wherever you need a grab handle for balance. Features stainless steel tubing and include chrome plated stanchions and stainless steel mounting screws. Made in USA.... MORE INFO

LED Step Hitch

Folds down for easy access to your truck bed, fold up to reveal and ultra-bright LED brake light. This rugged, die cast aluminum step fits any 2" hitch receiver to provide easy access to your truck bed. ... MORE INFO

Magentic License Plate Holder - Adams Magnetic Products

This heavy-duty ceramic magnet sticks to any steel surface. Vinyl coating prevents scratches. Two holes align with the holes in most license plates. Holder measures 8"L x 1"H x 1/2"W. Made in USA.... MORE INFO

Door Edge Trims

Style and protection for your truck. The THG1 edge trim has a pebble finish and a 3/32" opening. Sold in 15' lengths. Made in USA.... MORE INFO

Folding Grab Handle

Textured surface give you a sure grip. Sturdy construction with a stainless steel finish and a serrated surface to improve your grip. Handle folds out of the way when not in use. Includes mounting hardware. Imported.... MORE INFO

Grab/Pull Handles

Makes getting in and out of your truck safer and easier for both you and your customers. Mount anywhere on your truck where an extra handhold is needed. Comes with four pre-drilled holes to accept 1/4 ... MORE INFO

Hand Rail Stanchions

Each set includes one stanchion and all mounting hardware. Imported.... MORE INFO

Pull Grip - AW Direct - Handle Only - 1"W x 3-1/2"L

This Pull Grip Handle replaces damaged handles. Made in USA.... MORE INFO

Rubber Gasket for Flush T-Latches

Rubber gasket seals out moisture for use with Flush T-Latches.... MORE INFO

Clear Door Edge Protector

An attractive alternative to door molding, this clear vinyl sticks in place and wraps around the door edge. 3/8"W x 10'L roll is enough to do four doors. Made in USA.... MORE INFO

Brite-Tread Tough Steps

Sturdy brushed aluminum brackets hold a brite-tread step that won't sag or bend under repeated use. Powder coated to add shine and prevent corrosion. Sold in pairs. Imported.... MORE INFO

Female Edge for Compartment Matting - 12" x 2" - Turtle Plastics

Female Edge for use with Compartment Matting. Edge measures 12" x 2".... MORE INFO