GoJaks and Carrier Load Acc.

GoJak Vehicle Moving Jacks

GoJak 5000 Rated at 1,250 pounds each (5,000 pounds - 4 units). Works with wheels from 13" to most low profile 16" and tires up to 9" wide.GoJaks sold individually. GoJak 6200 Rated at 1,500 pounds ... MORE INFO

Wreckmaster Skates

Wedge a skate under each wheel of a disabled vehicle, and it will slide along without sticking or binding. Skates are ideal for loading and unloading carrier beds or positioning a vehicle behind your ... MORE INFO

Superslick GoJak 4500 - Vehicle Moving Jack - 20" W Tires

GoJaks sold individually. The same GoJak used in the race car industry, the SuperSlick lifts and moves lighter weight exotic vehicles that have tires as wide as 20 inches and up to 36 inches tall. Twin ... MORE INFO

Orange Tire Skates

Move a disabled vehicle easily without sticking or shaking Great for lining up vehicles to be hooked-up or loading car carrier beds Single skate overall dimensions 15-3/4"L x 3-1/2"W X 3-1/2"H Made ... MORE INFO

AW Direct Tire Skates

Ideal for trucks, SUV’s or any other vehicle with wider tires, or for those with flat tires. Wedge a Tire Skate underneath each tire of a disabled vehicle and the vehicle will slide smoothly along ... MORE INFO

Universal Locking Gojak® Mounting Bracket

Mounting plate is 5-3/4" x 5-3/4" Overall height is 8" I.D. of the tubing is 1-9/16" x 1-9/16" Vertically mount any GoJak by simply slipping the end into the bracket. A built-in lever captures the ... MORE INFO

Wide Ramps

Lightweight design carries maximum payloads with out sacrificing strength Ideal for one and two-car trailers Work with any trailer with a rub plate, bar or angle iron Serrated cross bars for maximum ... MORE INFO

Gojak Rack for Vehicle Moving Jacks

Store up to four GoJaks in your shop with this sturdy rack. Not for truck mounting.... MORE INFO

GoJak Repair Parts Kits

GoJak Pedal & Spring Repair Kit:This 16-piece kit fits all GoJak models. Includes 2 washers, 1 roll pin, 1 directional lever, 1 end stop spring, 1 end stop, 1 pedal, 1 locking pawl, 1 working pawl, 1 ... MORE INFO

GoJak Replacement Parts

Fits GoJak Model 5000 Only Sold as an Each Replacement Raceway Lock Screw for GoJak.... MORE INFO

GoJak® 3-Piece Lockable Truck Mounting Systems

These 3-piece steel mounting systems hold one GoJak in a horizontal position on your truck. A tab on the back allows you to run a lock cable or a long hasped padlock around the GoJak and through the ... MORE INFO

Universal Locking Gojak Bracket

Use this lockable bracket to store one GoJak on your truck. the hinged arm opens to accept the GoJak roller and then locks using your own padlock. Unique oval shape is wide enough to hold any GoJak ... MORE INFO

Lockable Gojak® Mounting Bracket

6"W x 11"L x 9 7/8"H overall Fits GJ-6000 only Made in USA This lockable steel bracket bolts to any flat surface and holds one GoJak securely in place. The hinged arm opens to accept the GoJak roller, ... MORE INFO

GoJak Weather Protector Jacket

Slip this nylon jacket over your GoJak to shield it from rain, road salt and sun damage. Tightens with a nylon drawstring to keep it in place. Large size fits models 5400, 6000 and 6200. The small ... MORE INFO

Gojak® Truck Mounting Brackets

USA Made Mounting plate is 4" x 4" Overall Height 5-3/4" I.D. of tubing is 1-5/8" x 1-5/8" These 6 inch high steel mounting brackets hold two GoJaks of any size. the 4x4 inch base mounts to any flat ... MORE INFO

In The Ditch GoJak Mount

This all new GoJak mount is for those who want to mount GoJaks to a flat surface. They’re made from aluminum and will hold the 5,000 and 6,000 Series GoJaks. The mount is easy to install and ... MORE INFO

Ramp Receivers

Easily attach ramps to the tailgate of your truck Professional installation hardware included with each kit Hardware includes 9 screws, 9 nutserts, 3 different drill bits and 2 allen keys USA made ... MORE INFO

Car Carrier Ramps

These ramps allow you to reduce the loading angle on your car carrier to make it easier to handle long nosed and low slung cars. The PD-40 ramps are 5 ft long with an effective width of 12 in. and overall ... MORE INFO

Hinged Ramp - 12"W x 60"L

Only 60" in length when folded, 120" when in use Capacity (WLL): 1,500 lb. per axle USA made When folded, these ramps lie easily in the bed of the truck. To use, attach ramps to the ramp receiver on ... MORE INFO

Starter Ramp - 14"W x 60"L

Hooks into the open rung of your full ramp Capacity: 4,000 lb. per axle USA made Ramp also allows you to start further back and reduce load angle.... MORE INFO