Truck Body Hardware

Half Fenders and Quarter Fenders

Protect the underside of your truck from dirt and debris. These stainless steel fenders mount over single or dual wheel rear tires to keep sand, salt, mud and road debris from flying forward and making ... MORE INFO

Folding Step - 6-1/2"W x 5"L x 5"H

Serrated surface prevents slipping. Made from malleable iron with a zinc finish, this step doubles as a hand hold, and folds out of the way when not in use. Holds up to 500 lbs. Mounting hardware not included. Made in USA.... MORE INFO

Rubber Fender Guards

Protect against damage from road splash and debris. These fender guards are not only functional, they also enhance the appearance of any vehicle. Fender guards help to eliminate damage caused by splash, ... MORE INFO

Flush T-Latches

T-latches hold doors closed tight. Flush mounted "t" latches are made for right hand mounting applications. Single point latches are supplied with two keys and feature a .66" adjustment of cam. Measure ... MORE INFO

Truck Steps

1-1/4" galvanized wire cable welded to 1-1/2" pipe sleeves. Diamond deck span tread flexible and durable withstand road and working conditions. Can be bolt on or welded to truck. Black powder coat finish. ... MORE INFO

Buyer Products Paddle Latches

Keep doors securely closed. These standard flush mount, single point latches measure 5 1/2” x 4 1/4”. Available with or without locks in stainless or rust proof steel. Mounts in 3 3/8” ... MORE INFO

Cable Step 9"T

1-1/4" galvanized wire cable welded to 1-1/2" pipe sleeves. Diamond deck span tread flexible and durable withstand road and working conditions. Can be bolt on or welded to truck. Black powder coat finish. ... MORE INFO

Fender Flares

Add a finishing touch to your truck. Custom designed for a perfect fit, these fiberglass fender flares install in minutes. Paint to match your truck for a truly custom look. Sold in pairs. Made in USA.... MORE INFO

Magentic License Plate Holder - Adams Magnetic Products

This heavy-duty ceramic magnet sticks to any steel surface. Vinyl coating prevents scratches. Two holes align with the holes in most license plates. Holder measures 8"L x 1"H x 1/2"W. Made in USA.... MORE INFO

Hand Rail Kits

Get great looks and added safety. Add these Hand Rails wherever you need a grab handle for balance. Features stainless steel tubing and include chrome plated stanchions and stainless steel mounting screws.... MORE INFO

Jumbo Folding Step - 6-3/4"W x 6-3/4"L x 5"H

Holds up to 2,000 pounds. This die cast zinc aluminum alloy step has a rugged chrome finish and a serrated texture for extra traction. Meets NFPA requirements. Includes rubber gasket. Mounting hardware ... MORE INFO

AW Direct Pull Grips

This Pull Grip Handle replaces damaged handles. Made in USA.... MORE INFO

Grab/Pull Handles

Makes getting in and out of your truck safer and easier for both you and your customers. Mount anywhere on your truck where an extra handhold is needed. Comes with four pre-drilled holes to accept 1/4 ... MORE INFO

Recessed Step - 7-3/8"W x 6-1/4"H x 4"D

Dual purpose item! Made from rust-free aluminum, this step features a shiny, polished face and a diamond plate tread for safety. 7 3/8"W x 6 1/4"H x 4"D. Requires a 5 9/16"W x 4 1/2"H hole to mount. ... MORE INFO

Rubber Gasket for Flush T-Latches

Rubber gasket seals out moisture for use with Flush T-Latches.... MORE INFO

Hand Rail Stanchions

Each set includes one stanchion and all mounting hardware.... MORE INFO

In The Ditch Quater Fenders

The stainless steel faceplate adds a clean smooth finish to the Quarter Fender Extender and provides great protection from road debris.... MORE INFO

Fender Flares for 1997+ Chevron Wrecker - 3-1/2"W

fiberglass Fender Flares are application specific for a perfect fit and can be painted to match your truck for a truly custom look Available in the standard 2" or 2-3/4" width or wider 4" flare for maximum ... MORE INFO