AW Direct - 1-800-243-3194

Heavy-Duty Combination 5th Wheel Adapter w/ Pintle Hook

This simple-to-use assembly features a miniature 5th wheel bridge, so you can use your underlift to tow a trailer by its 5th wheel pin. The universal design lets you slip the bridge into any underlift ... MORE INFO

Self Aligning Spring Fork

Made from high tensile steel, the pivoting head on this Self Aligning Spring Fork adjusts to fit the spring assembly of the towed vehicle. The pre-drilled four hole pattern permits a tight fit ... MORE INFO

7 inch High Stand for Fork

Use this 7" High Stand when your fork does not reach the lift point, or if extra clearance is needed for oil pans, etc. The standard 2" shaft fits most stingers on the market and the receiver hole accepts ... MORE INFO

Steertek Axle Fork - 8-1/4"W x 4"H

Steertek™ Axle ForkFits most trucks equipped with the new Hendrickson Steertek axle system. Sold indiviudally. Made in USA.... MORE INFO

Underlift Tie Downs

Keep the towed vehicle securely tied to your underlift while in tow. These rugged tie downs are designed to secure a towed vehicle to the forks of an under reach tow truck. Simply wrap each strap around ... MORE INFO

Volvo Axle Fork - 5"W x 5"H

Fits trucks equipped with Hendrickson's new Steertek axle system that lifts at the axle. Straps must be used for tie downs, not chain. Sold individually. Made in USA.... MORE INFO

Tow Eye Bus Axle Fork - 4-1/2"W x 9-1/2"H

For use on buses equipped with tow eyes. Also used to hook up trucks with front mounted snow plow brackets. Sold individually. Made in USA.... MORE INFO

Short Axle Forks

Short Forks are used for lifting at axles, springs, cross members or chassis frames. 2"D x 4" shaft. Sold individually. Made in USA.... MORE INFO

Aluminum Angle

Use our lightweight Aluminum Angle to replace heavy steel when towing trucks and buses. It is made from 6061T6 structural aluminum which is half the weight of steel and won't bend or crack as easily. ... MORE INFO

Tall Forks

This Tall Fork eliminates the need to use high stands. Gives you 7 inches of clearance between your crossbar and the bottom of the fork trough. Use it for axle and frame lifts on vehicles with deep oil ... MORE INFO

Dual Low Profile Receivers by Bro Wreckers, Inc.

These unique adjustable receivers give you the hook-up flexibility you need while out on the road. Their width can be adjusted to fit even the tightest or widest loads. Each is reversible from low to ... MORE INFO

Super Duty Axle Fork - 3-1/2"W x 4"H

Lifts the 2002+ Ford Super Duty with round front axles. Sold individually. Made in USA.... MORE INFO

Medium Axle Fork - 3-3/8"W x 6-1/2"H

These forks are used on spring, axle, cross member or frame lifts. This fork provides 6 1/2" of clearance between your crossbar and the bottom of the fork trough. 2"D x 4" shaft. Sold individually. Made in USA.... MORE INFO

Chain Fork

This Chain Fork allows you to use your underlift stinger as a heavy duty truck bar. These high tensile steel chain forks are machined from a solid bar and are extremely durable. Comes with a standard ... MORE INFO

Medium Axle Fork - 4-3/8"W x 5-5/16"H

Considered the most universal size of fork used in underlift towing, this 4 1/2" wide fork is used for lifts at axles, springs, cross members and chassis frames. Gives you 5-5/16" of clearance between ... MORE INFO

Wide Rear Axle Forks by Bro Wreckers, Inc.

This Wide Rear Axle Fork was designed to make rear axle towing simple. Many of the newer trucks are equipped with air bags or low mount light brackets. The 8" stinger to trough clearance allows you to ... MORE INFO

14" Fork Lift Extensions

Designed to fit 4 x 4" crossbars, they give you clearance around axle housings, steering boxed and 4 X 4 front axles. Sold in pairs. Made in USA.... MORE INFO

Bus Forks

Bus Fork This unique fork was specifically designed with a 2 1/2" dia. to fit the torsion bar on the front of a motor coach. It provides a snug fit to the bar without denting or crimping it. Sold individually. ... MORE INFO

Medium Axle Fork - 2-1/2"W x 6"H

This 2 1/2" Wide Fork is designed to fit snugly around the axle at the U-bolts on truck chassis like the International 4700-4900 series and similar trucks with 2½" front axle width. Use for lifting at ... MORE INFO

End Cap Chain Adapters

Convert your underlift into a tow bar! Ideal for when you can't use tow forks for lifting. Use with 1/2 or 5/8 inch chain. Order according to your under lift crossbar dimensions. Pair includes one driver's ... MORE INFO